 |
High output ,cartridge free bellow pump for circulating and automatic machines.
| Features | Benefits |
|---|---|
| Sealing done by one large stroke bellow | High reliabilityNo more lubricant cupsLeak freeTotal sealing between pump and its environment, ideal to work with moisture-sensitive catalystsIdeal for UV and pre-catalyzed materials |
| Ergonomic design of fluid passages | Fluid discharge without retention of a wide range of coating materials |
| Stainless steel design | Compatible with water-based materials |
| Balanced fluid section | Constant fluid output pressure |
| Mobile piston seal | Excellent suction capacity |
| Pressure ratio | 8/1 | |
| Fluid volume per cycle (cm3) | 440 | |
| Number of cycles per litre of products | 2.3 | |
| Fluid Output at 20 Cycles/mn (l/mn) | 8.8 | |
| Free flow rate (L/mn) | 26.4 | |
| Air Consumption @ 20 CPM at 5 bar | ||
| Maximum fluid pressure (bar) | 48 | |
| Maximum Fluid Temperature (°C) | 50 | |
| Maximum air inlet pressure (bar) | 6 | |
| Sound level (dBA) | 76 | |
| Sealing packing | Bellows | Polyethylene |
| Upper and lower | GT ployethylene | |
| Wetted parts | ||
| Weight (kg) | 54 | |
| Height (cm) | 110 | |
| Width (cm) | 40 | |
| Depth (cm) | 27 | |
True accelerator of performance for your AIRLESS gun, the new paint pump Kremlin Rexson EOS range brings together Efficiency, Optimization and Simplicity.
The innovative design and component quality bring reliability and performance and allow very simple maintenance, easy cleaning and safe color changes while using a minimum of solvents. The cost of ownership is reduced at a minimum.
The new air motor design allows for a smooth start-up under low pressure air and perfectly controlled fluid output, without any pulsation at the gun with very low air consumption.
Last generation paints developed for industrial markets are handle by EOS pump stainless steel construction without any problem.
EOS pump range are available in wall-mounted versions with air control panel. A large choice of accessories (cart, tripod, product filter, suction rods) are available to fit any customer need.
For circulating and large production.
The Turbo air motor is recommended for continued use
| Features | Benefits |
|---|---|
| Large diameter suction rod and high compression ratio | Can be used with a wide range of materials |
| Stainless steel design | Compatible with water-based materials |
| Simple design , reduced number of spare parts | Easy maintenance |
The Kremlin AIRMIX 10.14 pump is our most popular pump. It is the most efficient and environmentally friendly air-operated pump in the finishing industry. Ideal for feeding one Airmix spray gun in a small to medium production shop.
Recommended for anti-corrosion applications.
| Features | Benefits |
|---|---|
| Stainless steel design | Compatible with water-based materialsWell-suited for anti-corrosion materials |
| Rugged design | Excellent perfomances and easy maintenance in hard to reach places |
| Air motor muffler included | Very silent pump for better comfort of the operator |
Recommended for high viscosity products such as water-based and high solid paints. Ideal for outputs up to 1.5 litre/mn.
| Features | Benefits |
|---|---|
| Large suction fluid passage | For high viscosity materials |
| Puls-Absorber™ device | Stable and smooth flow |
| Stainless steel design | Compatible with water-based products |
| Stainless steel strainer | Long service life and good reliabilityNo crushing possible |
| Simple design , reduced number of spare parts | Easy maintenance |
Categories: Air Less Pumps, Pumps
Heavy Duty Industrial Diaphragm Pump
The PMP 150 pump is ideal for feeding all air spray, HVLP, electrostatic, manual, and automatic spray guns.
For circulating and large production.
The Turbo air motor is recommended for continued use.
| Features | Benefits |
|---|---|
| Sealing done by one large stroke bellow | High reliabilityNo more lubricant cupsLeak freeTotal sealing between pump and its environment, ideal to work with moisture-sensitive catalystsIdeal for UV and pre-catalyzed materials |
| Ergonomic design of fluid passages | Fluid discharge without retention of a wide range of coating materials |
| Stainless steel design | Compatible with water-based materials |
| Balanced fluid section | Constant fluid output pressure |
| Mobile piston seal | Excellent suction capacity |
Ideal for water-based and high solids materials
| Features | Benefits |
|---|---|
| Large diameter suction rod and high compression ratio | Can be used with a wide range of materials |
| Stainless steel design | Compatible with water-based materials |
| Simple design , reduced number of spare parts | Easy maintenance |
Ideal for outputs up to 1.5 litre/mn
| Features | Benefits |
|---|---|
| Large diameter suction rod and high compression ratio | Can be used with a wide range of materials |
| Stainless steel design | Compatible with water-based products |
| Simple design , reduced number of spare parts | Easy maintenance |
