Welcome To Sunrise marketing !

Home  /  Pumps  /  Air Less Pumps  /  Hasco Airless Pump

Eos airless 30c25
hasco
Zoom
Roll over image to zoom in

Hasco Airless Pump

Categories: ,

FLUID PRESSURE RATIO  28:1  10:1  23:1
 OUTPUT(GPM) L/min  4(1 GPM)  11.4(3 GPM)  6(1 1/2GPM)
 MAX.DISCHARGEPRESSURE  2,800pis / 196bar / 19.6mpa  1,000pis / 70bar / 7Mpa  1,980pis / 138bar / 13.8Mpa
 AIR PRESSURE RANGE  40~100pis / 3-7bar /
0.3~0.7Mpa		  40~100pis / 3-7bar /
0.3~0.7Mpa		  40~86pis / 3-6bar /
0.3~0.7Mpa
 MAX. PUMP SPEED
(CYCLE/min)		  60  66  80
 STROKE (mm)  100(4inch)  100 (4¾ inch)  60 (2 3/8inch)
 WEIGHT(kgs)  33  38  36
 DIMENSION(cm)  56 x 63 x 98  56 x 63 x 98  35 x 85 x 70
 TYPICAL FLUID HANDLED  ENAMEL, LACQUER,
POLY-URETHANE		  ENAMEL, LACQUER,
POLY-URETHANE		  ENAMEL, LACQUER,
POLY-URETHANE
 OPTION
FLUID PRESSURE RATIO  28:1  10:1  23:1
 OUTPUT(GPM) L/min  4(1 GPM)  11.4(3 GPM)  6(1 1/2GPM)
 MAX.DISCHARGEPRESSURE  2,800pis / 196bar / 19.6mpa  1,000pis / 70bar / 7Mpa  1,980pis / 138bar / 13.8Mpa
 AIR PRESSURE RANGE  40~100pis / 3-7bar / 0.3~0.7Mpa  40~100pis / 3-7bar / 0.3~0.7Mpa  40~86pis / 3-6bar / 0.3~0.7Mpa
 MAX. PUMP SPEED (CYCLE/min)  60  66  80
 STROKE (mm)  100(4inch)  100 (4¾ inch)  60 (2 3/8inch)
 WEIGHT(kgs)  33  38  36
 DIMENSION(cm)  56 x 63 x 98  56 x 63 x 98  35 x 85 x 70
 TYPICAL FLUID HANDLED  ENAMEL, LACQUER, POLY-URETHANE  ENAMEL, LACQUER, POLY-URETHANE  ENAMEL, LACQUER, POLY-URETHANE
 OPTION
Categories: ,

Related Products

,
Pompe flow max

For circulating and large production.
The Turbo air motor is recommended for continued use.

Features Benefits
Sealing done by one large stroke bellow High reliabilityNo more lubricant cupsLeak freeTotal sealing between pump and its environment, ideal to work with moisture-sensitive catalystsIdeal for UV and pre-catalyzed materials
Ergonomic design of fluid passages Fluid discharge without retention of a wide range of coating materials
Stainless steel design Compatible with water-based materials
Balanced fluid section Constant fluid output pressure
Mobile piston seal Excellent suction capacity
Read more
,
Pompes 2050et4050

Ideal for outputs up to 1.5 litre/mn

Features Benefits
Large diameter suction rod and high compression ratio Can be used with a wide range of materials
Stainless steel design Compatible with water-based products
Simple design , reduced number of spare parts Easy maintenance
Read more
,
Pompe 65130
Read more
,
Pumps 40130

Recommended for anti-corrosion applications.

Features Benefits
Stainless steel design Compatible with water-based materialsWell-suited for anti-corrosion materials
Rugged design Excellent perfomances and easy maintenance in hard to reach places
Air motor muffler included Very silent pump for better comfort of the operator
Read more
,
Eos airless 30c25

True accelerator of performance for your AIRLESS gun, the new paint pump Kremlin Rexson EOS range brings together Efficiency, Optimization and Simplicity.

The innovative design and component quality bring reliability and performance and allow very simple maintenance, easy cleaning and safe color changes while using a minimum of solvents. The cost of ownership is reduced at a minimum.

The new air motor design allows for a smooth start-up under low pressure air and perfectly controlled fluid output, without any pulsation at the gun with very low air consumption.

Last generation paints developed for industrial markets are handle by EOS pump stainless steel construction without any problem.

EOS pump range are available in wall-mounted versions with air control panel. A large choice of accessories (cart, tripod, product filter, suction rods) are available to fit any customer need.

Read more
,
Pmp 4050 wb

Recommended for high viscosity products such as water-based and high solid paints. Ideal for outputs up to 1.5 litre/mn.

Features Benefits
Large suction fluid passage For high viscosity materials
Puls-Absorber™ device Stable and smooth flow
Stainless steel design Compatible with water-based products
Stainless steel strainer Long service life and good reliabilityNo crushing possible
Simple design , reduced number of spare parts Easy maintenance
Read more
,
PMP 150

Categories: ,

Heavy Duty Industrial Diaphragm Pump

The PMP 150 pump is ideal for feeding all air spray, HVLP, electrostatic, manual, and automatic spray guns.

Read more
,
Pompe 08120

For circulating and large production.
The Turbo air motor is recommended for continued use

Features Benefits
Large diameter suction rod and high compression ratio Can be used with a wide range of materials
Stainless steel design Compatible with water-based materials
Simple design , reduced number of spare parts Easy maintenance
Read more
,
10.14 pumps

The Kremlin AIRMIX 10.14 pump is our most popular pump. It is the most efficient and environmentally friendly air-operated pump in the finishing industry. Ideal for feeding one Airmix spray gun in a small to medium production shop.

Read more
,
Pompe 2025

Ideal for water-based and high solids materials

Features Benefits
Large diameter suction rod and high compression ratio Can be used with a wide range of materials
Stainless steel design Compatible with water-based materials
Simple design , reduced number of spare parts Easy maintenance
Read more
,
Pompe 20-220 ft

High output ,cartridge free bellow pump for circulating and automatic machines.

Features Benefits
Sealing done by one large stroke bellow High reliabilityNo more lubricant cupsLeak freeTotal sealing between pump and its environment, ideal to work with moisture-sensitive catalystsIdeal for UV and pre-catalyzed materials
Ergonomic design of fluid passages Fluid discharge without retention of a wide range of coating materials
Stainless steel design Compatible with water-based materials
Balanced fluid section Constant fluid output pressure
Mobile piston seal Excellent suction capacity
Read more
Navigation

Quickview

Close

Categories