 |
X ASI40 GT, KREMLIN REXSON original design for abrasive HS (high solids) materials.
X ASI40 GT V, unique KREMLIN REXSON design for UV materials difficult to flush. Fluid sections with circulation, straight fittings to prevent any material deposit on the GT cartridge and perfect flushing for an increased life time.
Option to position the product inlet on the side or underneath by rotating the front of the gun. Tip mounting without any seal (stainless steel on stainless steel)
AIRLESS spraying = High power preventing any needle blockage and suited for a wide range of products.
| Features | Benefits |
|---|---|
| Fitted with a GT cartridge | Strong resistance to very abrasive UV and HS materials for an improved reliability |
| Small ball needle | For an improved laminar fluid passage |
| Simple and unique design (separated small ball needle and cartridge) | Very easy to service |
| Large choice of tips | Recommended for large fluid outputs and very high viscosity material applications |
| 400 bar spring | Strong power reducing any needle blocage |
| Trigger air pressure (bar mini) | 5.5 |
| Maximum fluid pressure (bar) | 400 |
| Fluid output (cc/mn) | Upon tips |
| Weight (g) (gun only) | 700 |
| Maximum Fluid Temperature (°C) | 50 |
| Body of the gun | Stainless steel |
| Wetted parts | Stainless steel, treated stainless steel, PTFE |
| Seat | Carbide |
The Trio HVLP Gravity Feed Spray Gun operates at an air pressure of 10 psi instead of the conventional 45-70 psi. With a reduction in bounce back and over spray, the Trio HVLP gives you improved transfer efficiency, resulting in paint savings of around 30%.
The Trio HVLP Gravity feed spray gun with its precision workmanship gives you tremendous paint savings and at the same time it gives your products a perfect finish quality. It is light weight and well balanced with a smooth trigger action to reduce operator fatigue. The air flow controls are also located on the gun body for ease of operation.
The Trio HVLP comes with a high quality, light weight nylon 6 paint cup with a screw on cap to prevent spillages. The cups are available in two different sizes to suite your application 500 ml & 700 ml. The unique design of the gun and the cup ensures maximum utilization of paint.
Categories: Air Less Pumps, Pumps
EOS is basedon 80 years of KREMLIN REXSON technical expertise, innovation and dedication to our customers. The EOS pumps range articulates around 3 strong themes: Efficiency, Optimization and Simplicity.
The EOS range is the ideal partner of your AIRMIX and AIRLESS spray guns, providing exceptional performances (quality of finish, high transfer efficiency).
A large choice of accessories allow to create various configuration AIRMIX & AIRMIX elecrostatic; to meet all custmer requirements.
The Trio HVLP Pressure Feed Spray Gun operates at an air pressure of 10 psi instead of the conventional 45-70 psi, which results in a reduction of bounce back and over spray, thereby increasing the transfer efficiency. The Trio HVLP spray gun gives you a paint savings of about 30%.
The Trio HVLP Pressure feed spray gun with its precision workmanship gives you tremendous paint savings and at the same time it gives your products a perfect finish quality. The Trio HVLP is light weight and well balanced with a smooth trigger action to reduce operator fatigue. The air flow controls are also located on the gun body for ease of operation.
Categories: Air Less Pumps, Pumps
The ATX Airmix® gun, with its unsurpassed quality of atomization provides high finish quality and important product savings. Worldwide recognized by professionals, ATX automatic guns are widely used in automatic finishing lines in most markets.
The fluid circulation is available in the base (no pressure loss) or inside the gun (quick flushing).
Categories: Air Less Pumps, Pumps
Compact AIRMIX® technology – reduced size.
The AXC Airmix® gun, thanks to its ultra-compact size and very reduced weight increases the performances and the efficiency of the automatic machines.
Large dimension fluid passages allos to handle a wide range of materials.
The atomization quality offered by last generation aircaps and tips guarantees a finish quality and very important product savings.
